Mod. K - Plates horizontal lifting with locking device
Model
K is a multipurpose clamp for horizontal positioning,erecting, handling and
sorting horizontally beams, pre-fabricated steel sections equipped with a
Lock-Close device. The split lower jaw enables the clamp to be used in
structural shapes. Use three or more clamps to increase load stability.The
clamps should be positioned on the member to be lifted right on its centre of
gravity, and in a way that the force applied by thecrane is in line with the
lifting shackles. Never exceed 10° degrees sideloading. For metal sheets of big
dimensions, we recommend to use the clamps preferably connected to a beam. Make
sure that the gripping cam and the jaw are in full contact with the load and not
on the edge. Leave a clearance of 4÷5 mm between the load and the back ofthe jaw. Start
to lift only when the lock lever is placed in the Lock-Closed position.Remove
the clamps only after the plate is completely supported and at rest in a stable
position. Relax forces, keeping hands clear from mechanism, move lock handle to
"open" position and take clamp off from member.
| Code | Capacity Kg. | Opening mm | Weight Kg. |
|
 |
| CK01000 | 1 | 0-25 | 4,5 | ||
| CK02000 | 2 | 0-32 | 10,0 | ||
| CK04000 | 4 | 0-38 | 15,0 | ||
| CK08000 | 8 | 0-51 | 44,0 |
 |
 |
|
 |
|
Interfron SpA - via canale, 2 - 16035 Rapallo (GE) - Italy
Tel : (0039) 0185 263636 - Fax : (0039) 0185 263355